Tempest 2.5: Tempest De-lidder

February 19, 2016 by Astri Leave a Comment

Tempest De-lidder

[Read more…]

Posted in: Tempest, Tempest 2.5, What's New

Tempest 2.4: Improved barcode scanner, Improved Recirculate tab, 3-Step Wash Option

January 13, 2016 by Astri Leave a Comment

The Tempest 2.4 update includes the following updates:

[Read more…]

Posted in: Tempest, Tempest 2.4, What's New

Mantis 3.4: Multi-Plate Dispensing, Configurable Dispense Path, Checkerboard Dispense Patterns

December 28, 2015 by Astri Leave a Comment

Multi-Plate Dispensing Mantis now provides you with multi-plate dispensing for one dispense list. This feature saves you more time because the wash/recovery process will be done only after all the plates are successfully dispensed, and the...

[Read more…]

Posted in: Mantis, Mantis 3.4, What's New

Mantis 3.1: Configure all chips and inputs at once; improved Plate Typed Editor; new protocol editor

January 14, 2015 by Astri Leave a Comment

Configure All Chips and Input Types at Once. It can be time consuming to configure each chip position individually if each chip and input type at all of your chip stations is the same. The new Mass Update Inputs button allows you to make changes...

[Read more…]

Posted in: Mantis, Mantis 3.1, What's New

Tempest 2.3: Improved plate handling, reagent recirculation settings, and Plate Type Editor

October 09, 2014 by Astri Leave a Comment

The Tempest 2.3 release introduces the following new features:

[Read more…]

Posted in: Tempest, Tempest 2.3, What's New

Mantis 3.0: Continuous Flow dispensing with Pressurized Bottles; Dual Wash Stations

April 12, 2014 by Astri Leave a Comment

Continuous Flow Chips and Pressurized Bottle Dispensing. Mantis v3 introduces Continuous Flow chips to the Mantis chip lineup. When combined with pressurized bottles, Continuous Flow chips can dispense volumes from 5 µL – 2000 µL in an...

[Read more…]

Posted in: Mantis, Mantis 3.0, What's New

Mantis 2.5: Custom dispense delay messages; Improved Plate Type Editor; New Drop Alignment Wizard

December 06, 2013 by Astri Leave a Comment

Custom Dispense Delay Messages. You can now program the dispense delay to display instructions that pertain to the delay, i.e.: “Add a reagent to Chip 1” or “Shake the plate”. Type your messages in the Message box of the Dispense List Designer.

[Read more…]

Posted in: Mantis, Mantis 2.5, What's New

Mantis 2.4: Enhanced Motor encoders for better dispenses

June 04, 2013 by Astri Leave a Comment

In Mantis 2.4, the Mantis motor encoders have been enhanced to protect against accidental skipping that may occur during dispensing and tuning processes. If the Mantis's arms do skip, a message will pop up asking you whether you want to continue the...

[Read more…]

Posted in: Mantis, Mantis 2.4, What's New

Mantis 2.3: Rock Maker and Formulator integration; Remote start option added

April 25, 2013 by Astri Leave a Comment

With the release of Mantis 2.3, Mantis now integrates with Rock Maker and Formulator, enabling you to dispense experiment designs created in Rock Maker or Formulator at will. Other changes include:

[Read more…]

Posted in: Mantis, Mantis 2.3, What's New

Tempest 2.2: Report enhancements; New Option Controls

December 27, 2012 by Astri Leave a Comment

Tempest 2.2 brings several enhancements to reports, changes to the system options, and several other smaller changes throughout the software.

[Read more…]

Posted in: Tempest, Tempest 2.2, What's New

Subscribe to Email Updates

Recent Posts